Skip to content
Golf Drivers

Orlimar Slice Killer Offset Driver Review (2026): A Spec-Based Look

This spec-based review examines the Orlimar Slice Killer offset driver. We analyze the 10.5-degree loft and 7-degree closed face angle to explain how it promotes a draw and reduces slicing for right-handed golfers.

By FairGear Editorial Team

· 8 min read

Orlimar Slice Killer Offset Driver Review (2026): A Spec-Based Look
Product image from the Amazon listing

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This orlimar slice killer offset driver review examines a club built for straighter ball flight. It features a 10.5-degree loft and a 7-degree closed face angle. These specs work together to reduce side spin and promote a draw. The 460cc titanium head provides a large sweet spot for forgiveness. You get a regular flex graphite shaft that supports moderate swing speeds. The design aims to help golfers who struggle with slices. This tool targets players who want to keep their drives in play. It combines specific geometry with lightweight materials to improve accuracy off the tee.

  • 7-degree closed face angle designed to counteract slices
  • Offset hosel delays impact to help square the face
  • 460cc titanium head with high COR for distance
  • Heel-weighted screw creates draw-enhancing spin
  • Regular flex ultra-light graphite shaft

Good fit for

This driver suits right-handed golfers who frequently slice the ball. The 10.5-degree loft and closed face help straighten your drives. The offset hosel gives you extra time to square the clubface. Players with moderate swing speeds benefit from the regular flex shaft. The 460cc head offers forgiveness on mishits. If you lose balls to the right, this setup helps you keep them in play. It is ideal for beginners or high-handicap players seeking consistency.

Who can skip it

Look elsewhere if you prefer a traditional driver feel. The closed face and offset design change your natural swing path. Players who already hit a draw may find the draw bias excessive. The regular flex shaft may feel too soft for faster swing speeds. Those seeking maximum distance over accuracy might prefer a standard face angle. The heel weighting alters the club's balance point. If you want a neutral face at address, this specific geometry is not for you.

Verdict

This driver uses specific geometry to help slicers straighten their shots. It is a practical choice for players needing help with ball flight direction.

Key specs explained for this driver

Loft: 10.5°

This loft angle sets the initial launch direction of the ball. A 10.5-degree angle helps get the ball airborne quickly, which is useful if you struggle with low drives. It works with the closed face to reduce side spin. You should compare this to lower lofted drivers if you seek more roll, or higher lofts if you need extra height. This setting suits players seeking a balanced trajectory without excessive spin.

Head Volume: 460cc

The clubhead measures 460 cubic centimeters, which is the maximum size allowed by golf rules. This large volume creates a bigger sweet spot, offering more forgiveness on off-center hits. You benefit from consistent distance even if your contact is not perfect. When shopping, compare this to smaller heads that offer less margin for error. This size is ideal for beginners or high-handicap players prioritizing stability over workability.

Shaft Flex: Regular

This flex level matches the swing speed of moderate-speed players. The shaft bends during your downswing to store and release energy, adding distance. If you swing too slowly, a regular shaft may feel stiff; if you swing too fast, it may feel too soft. Compare this to stiff or senior flex options based on your tempo. This flex suits average recreational golfers seeking a blend of control and power.

Shaft Material: Graphite

Graphite shafts are significantly lighter than steel, allowing for faster swing speeds. This material reduces overall club weight, which helps players generate more distance with less effort. You will notice less vibration on mishits compared to metal shafts. When comparing options, consider that graphite offers flexibility while steel offers stability. This material is standard for drivers to maximize distance and comfort for most amateur players.

Hand Orientation: Right Handed

This configuration is designed for players who stand on the left side of the ball and swing with their right hand dominating. It dictates the hosel position and grip orientation. You must ensure this matches your natural stance to avoid uncomfortable swing mechanics. Compare this with left-handed models if you are a lefty. This is the standard orientation for the majority of golfers and ensures proper alignment with the target line.

Design and build details

The head is constructed from titanium with a 460cc volume. This size offers a large sweet spot for forgiveness on off-center hits. The listing notes an all-black PVD finish. This coating enhances durability and provides a modern look. The club is designed for right-handed men. It comes with a regular flex graphite shaft. Graphite is lighter than steel, which helps generate clubhead speed. The shaft length is 45.5 inches. This is a standard length for drivers, allowing for a full swing without compromising control.

The design includes an offset hosel. This feature delays impact by a split second. It helps square the face at contact, promoting a draw for right-handed players. A heel-weighted screw is also present. This screw enhances spin and further encourages a leftward ball flight for those who slice. The club weighs one pound. This weight is typical for a driver, balancing power and maneuverability. The width is listed as five inches, and the height is forty-seven inches. These dimensions contribute to a stable address position. A custom rubber grip is included. This provides traction in various weather conditions. The listing states these features combine to prevent slices. The design prioritizes straightness and distance for players seeking correction.

Setup and everyday use guide

Setting up this driver begins with understanding its specific geometry. The club features a 7-degree closed face angle. This design helps square the face at impact, reducing the slice for right-handed golfers. The offset hosel delays impact by a fraction of a second. This delay encourages a draw bias, moving the ball flight to the left. You should expect a straighter trajectory off the tee.

The shaft is a 100% ultra-light graphite regular flex. It measures 45.5 inches in length. This length is standard for drivers, allowing for a full swing arc. The graphite material reduces overall weight while maintaining stability. The club comes with an Orlimar custom rubber grip. This provides secure handling in various weather conditions. The head weighs approximately one pound, which is typical for a 460cc titanium construction.

Everyday use involves leveraging the Fairway Finder technology. An anti-slice heel weighted screw adds draw-enhancing spin. Independent robot testing suggests this setup prevents slices by 29.7 yards. This specification helps you avoid deep rough or trees. The titanium head offers a high coefficient of restitution, staying just below the USGA legal limit. This ensures maximum distance without violating rules. The club includes a headcover for storage. You can trust the titanium construction for durability on the course. The all-black PVD finish resists wear and maintains its modern appearance. This setup is ideal for players seeking consistency and straighter drives.

What You Need To Know

You will need a compatible shaft if you plan to adjust the flex. This model comes with a regular flex graphite shaft, but senior flex is also available. Check that your current grip fits the standard diameter. The club includes a headcover, so you do not need to buy one separately. Store the driver in a cool, dry place to protect the PVD finish. Wipe the face with a soft cloth after each round to remove dirt. This driver sits alongside other offset options in Golf Gear. It differs by using titanium for a higher coefficient of restitution. Aluminum alternatives often yield shorter distances. If you want maximum distance with slice correction, this spec combination suits you. Verify that your swing speed matches the regular flex rating. A senior flex might feel better if you have a slower tempo. The 460cc head volume is standard for modern drivers. It offers forgiveness on mishits. Ensure your bag has space for the included headcover. This product is designed for men. It is not suitable for junior players due to its length and weight.

Check before you buy

  • Confirm your swing speed matches the regular flex rating
  • Check if you prefer the available senior flex option
  • Ensure your bag holds the included headcover
  • Verify the grip diameter fits your hand comfortably
1
Orlimar Slice Killer Offset Driver

Orlimar Slice Killer Offset Driver

Best for: Golfers who slice and want mechanical correction

Loft
10.5°
Shaft Flex
Regular
Hand Orientation
Right Handed
Shaft Material
Graphite
Head Volume
460cc
Color
Black

This driver uses a 10.5-degree closed face and offset hosel to help square the clubface at impact. The 460cc titanium head features heel weighting for draw-enhancing spin. It comes with a regular flex graphite shaft and a 45.5-inch length. The design targets right-handed men seeking slice prevention through mechanical adjustments rather than swing changes.

Pros
  • 7-degree closed face angle straightens drives
  • Offset hosel delays impact to square the face
  • Heel-weighted screw promotes draw spin
  • Titanium construction maximizes distance potential
  • 460cc head volume offers forgiveness
Cons
  • Fixed 10.5-degree loft limits adjustability
  • Regular flex shaft suits slower swing speeds
  • 45.5-inch length is shorter than standard 45.75 inches
Good fit if
  • You struggle with slicing the ball
  • You prefer a draw-biased ball flight
  • You want a straightforward anti-slice solution
Skip if
  • You need adjustable loft settings
  • You prefer a standard face angle
  • You require a stiffer shaft flex

Verdict: Orlimar Slice Killer 10.5° Offset Driver is a practical tool for right-handed golfers who slice frequently. Its closed face and offset design mechanically correct your aim and face alignment at impact.

Specifications side by side

SpecOrlimar Slice Killer Offset Driver
Loft10.5°
Shaft FlexRegular
Hand OrientationRight Handed
Shaft MaterialGraphite
Head Volume460cc
ColorBlack
Target AudienceMen
Dimensions5 × 5 × 47 inches
Weight1 pounds
Size10.5A
ModelOR738068

Frequently asked questions

Is the Orlimar Slice Killer good for right-handed golfers?

Yes. This driver is designed specifically for right-hand orientation. The offset hosel and closed face angle help square the clubface at impact. This mechanical correction reduces the tendency to slice the ball. It is a practical tool for players who struggle with right-to-left ball flight.

What loft angle does this driver have?

The model features a 10.5-degree loft. This angle helps launch the ball quickly into the air. It works in tandem with the closed face design to reduce side spin. The loft setting is fixed, providing a consistent launch condition for each shot without needing adjustments.

Does it come with a graphite shaft?

Yes. The club is equipped with a graphite shaft. The listing specifies a regular flex for this version. Graphite construction helps absorb vibration and can assist with swing speed. The shaft is integrated into the 47-inch overall length of the driver.

How heavy is the Orlimar Slice Killer driver?

The club weighs approximately one pound. This weight is distributed within the 460cc titanium head. The head size offers a large sweet spot for forgiveness. The total length is 47 inches, which is standard for most modern drivers.

What color is the clubhead?

The driver features an all-black finish. The listing describes this as a PVD coating. This finish enhances durability against wear and tear. It provides a modern, sleek look that contrasts with traditional chrome finishes. The color is consistent across the head and hosel.

Is this driver suitable for beginners who slice?

It is a practical choice for this group. The offset design mechanically corrects aim and face alignment. This helps right-handed golfers who frequently slice the ball. The large 460cc head also offers forgiveness on off-center hits. It simplifies the process of getting the ball straight.

See also

How this review was put together

  • Specs are quoted from the Amazon listing, not measured in a lab.
  • The score is out of 10, based on listed specifications and buyer feedback.
  • Prices were read from the listing when this page was last built and move without notice.

2,523 reviews · 1,445 rated products · 87 brands tracked

We earn a commission when you buy through our Amazon links. That never changes a score.

More Golf Drivers

See all

Deal alerts

A weekly note when tracked products drop below their usual Amazon price.

Demo form. It is not connected to any mailing list and stores nothing.